Home / Products / PETG / Shrinkage Rate Is High PETG Film SLEEVEMAKER-GM35

All

News

Shrinkage Rate Is High PETG Film SLEEVEMAKER-GM35

Shrinkage Rate Is High PETG Film SLEEVEMAKER-GM35

Disclaimer：The following information is based on the knowledge and experience we have actually mastered. We strongly recommend that users thoroughly and carefully test products before using them to verify whether they are suitable for users' own process conditions and uses, and suggest that we consult with our technicians. The above technical information is not regarded as any guarantee of us, and therefore,we do not bear any responsibility.

PREV：PETG Film SLEEVEMAKER-GH50 For Steam Tunnels
NEXT：PETG Film Sleevemaker-GM40 Heat-shrinkable Polyester Film
Contact Us

Details：

 

Properties

Unit

Spec.

Test Method

Typical thickness

μm

35±2

ASTM D 1400

Density

g/c㎡

1.32

ASTM D 1505

Tensile strength

-Transverse Direction(TD)

-Machine Direction(MD)

Psi

 

≥23200

≥6525

ASTM D-882

Elongation at break

-Transverse Direction(TD)

-Machine Direction(MD)

%

 

≥35

≥350

ASTM D-882

Shrinkage

-Transverse Direction(TD)

-Machine Direction(MD)

%

 

55-70

≤5

Chancing Method

(85℃,10 Sec.in water)

Haze

%

≤5

ASTM D-1003

Gloss@ 60° degrees

%

≥87

ASTM D-523

Coefficient of friction

 

0.4-0.6

ASTM D 1894

Wetting  Tension

mN/m

≥40

ASTM D2578

SLEEVEMAKER-GM, Shrink Curve

Product description

Related Products：