Home / Products / PETG / Heat-shrinkable PETG Film SLEEVEMAKER-GH40

All

News

Heat-shrinkable PETG Film SLEEVEMAKER-GH40

Heat-shrinkable PETG Film SLEEVEMAKER-GH40

Disclaimer：The following information is based on the knowledge and experience we have actually mastered. We strongly recommend that users thoroughly and carefully test products before using them to verify whether they are suitable for users' own process conditions and uses, and suggest that we consult with our technicians. The above technical information is not regarded as any guarantee of us, and therefore,we do not bear any responsibility.

PREV：No previous product
NEXT：High shrinkage PETG Film SLEEVEMAKER-GH45
Contact Us

Details：

 SLEEVEMAKER-GH is a heat-shrinkable polyester film with excellent shrinking characteristics. It’s applicable in sleeves, suitable for hot air and steam tunnels, and can meet demands on different packaging products, shapes, shrinking requirement.

Properties

Unit

Spec.

Test Method

Typical thickness

μm

40±2

ASTM D 1400

Density

g/c㎡

1.32

ASTM D 1505

Tensile strength

-Transverse Direction(TD)

-Machine Direction(MD)

Psi

 

≥24650

≥7250

ASTM D-882

Elongation at break

-Transverse Direction(TD)

-Machine Direction(MD)

%

 

≥35

≥400

ASTM D-882

Shrinkage

-Transverse Direction(TD)

-Machine Direction(MD)

%

 

≥70

≤5

Chancing Method

(85℃,10 Sec.in water)

Haze

%

≤5

ASTM D-1003

Gloss@ 60° degrees

%

≥87

ASTM D-523

Coefficient of friction

 

0.4-0.6

ASTM D 1894

Wetting  Tension

mN/m

≥40

ASTM D2578

SLEEVEMAKER-GH, Shrink Curve

All details in this data sheet are based on our present technical knowledge.

They neither guarantee certain characteristics of products nor their suitability for a particular application.

Product description

Related Products：